This view shows a 1km resolution raster version of the Land Cover Map 2007 for Great Britain. The data consists of 23 bands. Each band represents a target class, broadly representing a Broad Habitat, and within the band each 1km pixel represents a percentage cover value of that class. The dataset is part of a series of data products produced by the Centre for Ecology & Hydrology known as LCM2007. LCM2007 is a parcel-based thematic classification of satellite image data covering the entire United Kingdom. The map updates and upgrades the Land Cover Map of Great Britain (LCMGB) 1990 and LCM2000. Like the earlier 1990 and 2000 products, LCM2007 is derived from a computer classification of satellite scenes obtained mainly from Landsat, IRS and SPOT sensors and also incorporates information derived from other ancillary datasets. LCM2007 was classified using a nomenclature corresponding to the Joint Nature Conservation Committee (JNCC) Broad Habitats, which encompasses the entire range of UK habitats. In addition, it recorded further detail where possible. The series of LCM2007 products includes vector and raster formats, with a number of different versions containing varying levels of detail and at different spatial resolutions.

This data contains values of bare sand area, modelled wind speed, aspect and slope at a 2.5 m spatial resolution for four UK coastal dune fields, Abberfraw (Wales), Ainsdale (England), Morfa Dyffryn (Wales), Penhale (England). Data is stored as a .csv file. Data is available for 620,756.25 m2 of dune at Abberfraw, 550,962.5 m2 of dune at Ainsdale, 1,797,756.25 m2 of dune at Morfa Dyffryn and 2,275,056.25 m2 of dune at Penhale. All values were calculated from aerial imagery and digital terrain models collected between 2014 and 2016. For each location, areas of bare sand were mapped in QGIS using the semi-automatic classification plugin (SCP) and the minimum distance algorithm on true-colour RGB images. The slope and aspect of the dune surface at each site was calculated in QGIS from digital terrain models. Wind speed at 0.4 m above the surface of the digital terrain model at each site was calculated using a steady state computational fluid dynamics (CFD). Data was collected to statistically test the relationship between bare sand and three abiotic physical factors on coastal dunes (wind speed, dune slope and dune slope aspect). Vertical aerial imagery was sourced from EDINA Aerial Digimap Service and digital terrain models from EDINA LIDAR Digimap Service. Wind speed data was generated and interpreted by Dr Thomas Smyth (University of Huddersfield). Full details about this dataset can be found at https://doi.org/10.5285/972599af-0cc3-4e0e-a4dc-2fab7a6dfc85

The dataset contains model output from an agricultural land use model at kilometre scale resolution over Great Britain (GB) for four different climate and policy scenarios. Specifically, arable area is modelled for with or without a climate tipping point (standard (medium emissions scenario SRES-A1B) climate change vs Atlantic Meridional Overturning Circulation (AMOC) collapse) and with or without widespread irrigation use for farmers from 2000 to 2089. Full details about this dataset can be found at https://doi.org/10.5285/e1c1dbcf-2f37-429b-af19-a730f98600f6

This dataset shows potential carbon storage as modelled for the urban areas of Milton Keynes/Newport Pagnell, Bedford, and Luton/Dunstable, UK. The modelling approach used the ‘InVEST (Integrated Valuation of Ecosystem Services and Trade-offs) 3.1.0’ ecosystem service model suite, raster land cover maps at two spatial resolutions (5 m and 25 m) and published literature values for carbon storage by land cover. The resulting data are presented in the form of two ‘GeoTIFF’ raster map files (and associated metadata and spatial information files required by software) that can be viewed and manipulated in Geographic Information Software. The units are kg C per square meter. The purpose of the modelling was to help assess and visualise the value that urban green space represents to urban residents and natural systems in just one of many ecosystem services. This research was conducted as part of the larger 'Fragments, Functions, Flows and Urban Ecosystem Services' (F3UES) programme. Detailed methods and results of this analysis are published in: Grafius DR, Corstanje R, Warren PH, et al (2016) The impact of land use/land cover scale on modelling urban ecosystem services. Landsc Ecol 31:1509–1522. doi: 10.1007/s10980-015-0337-7. Full details about this dataset can be found at https://doi.org/10.5285/9209af2c-24f6-4e37-98fe-550032e97a2c

The dataset contains chemistry data from streambed porewater (10 and 20 cm) and surface water, as well as nitrogen chemistry data at 2.5 cm resolution within the upper 15 cm of the streambed. The dataset includes concentrations of dissolved organic carbon (DOC), carbon dioxide, methane, ammonium, nitrate, nitrite and nitrous oxide, and isotopic ratios of δ13CCO2, δ15NNO3+NO2 and δ18ONO3+NO2. Also included are measurements of dissolved oxygen and temperature. Samples were collected from three reaches within the stream, an upstream sandy reach, a mid-stream sandy reach and a downstream gravel reach. The work was carried out with Natural Environment Research Council (NERC) funding through a PhD (NERC award number 1602135), grant (NE/L004437/1) and Life Sciences Mass Spectrometry Facility grant (CEH_L102_05_2016). Full details about this dataset can be found at https://doi.org/10.5285/00601260-285e-4ffa-b381-340b51a7ec50

This dataset consists of an ecology-focused survey of stillwaters along the rivers Yure and Swale and sediment flux measurements recorded at sites along the river Esk. The dataset results from a study which was part of the Rural Economy and Land Use (RELU) programme. The project analysed the complex network of natural and socio-economic relationships around angling in the river environment, including institutions of governance and land use practices at a range of interconnected scales. The sustainability, integrity and ecological value of river catchments are currently major issues for science. The management of freshwaters and their ecologies requires addressing processes that work across the boundaries between the natural environment, economy and society. This research focused upon these cross-cutting processes in an interdisciplinary, holistic assessment of river environments through the case of angling. Angling benefits from and influences river quality, design and management. It also links urban and rural environments and is an economic driver for the rural economy, involving about 4 million people in England and Wales and contributing 6 billion pounds to the economy through freshwater angling alone. This research aimed to provide insights into how environmental and socio-economic drivers for rural change work. This project therefore aimed to identify and analyse the complex network of influences and feedbacks around angling in the rural environment. These include natural and socio-economic influences, interdisciplinary research from both natural and social science disciplines (aquatic ecology, geomorphology, anthropology, sociology, human geography), as well as stakeholders from government, NGOs and the local community. This project focused upon three rivers in northern England - the Esk, Ure and Swale - in the course of an integrated and fine-grained study. The postal survey and business interviews from this study are available at the UK Data Archive under study number 6580 (see online resources). Further documentation for this study may be found through the RELU Knowledge Portal and the project's ESRC funding award web page (see online resources).

This data set consists of various hydrological measurements taken over two years of instrumental monitoring in fields of willow and Miscanthus crops from a study as part of the NERC Rural Economy and Land Use (RELU) programme. Future policies are likely to encourage more land use under energy crops: principally willow, grown as short rotation coppice, and a tall exotic grass Miscanthus. These crops will contribute to the UK's commitment to reduce CO2 emissions. However, it is not clear how decisions about appropriate areas for growing the crops, based on climate, soil and water, should be balanced against impacts on the landscape, social acceptance, biodiversity and the rural economy. This project integrated social, economic, hydrology and biodiversity studies in an interdisciplinary approach to assessing the impact of converting land to Miscanthus grass and short-rotation coppice (SRC) willows. Two contrasting farming systems were focused on: the arable-dominated East Midlands; and grassland-dominated South West England. This data set consists of various hydrological measurements taken over two years of instrumental monitoring in fields of both crops. GIS and biodiversity survey datasets are also available. The public attidues questionnaire data from this study are available at the UK Data Archive under study number 6615 (see online resources). Further documentation for this study may be found through the RELU Knowledge Portal and the project's ESRC funding award web page (see online resources).

These data are metrics of landscape configuration and modelled provision of Ecosystem services for a large number of virtual landscapes (c. 7500) superimposed on real topography. The landscapes are made up of patches of woodland interspersed across a grassland, and were generated with the landscapeR package in R. The topography used is from the Conwy catchment, split into 10 sections to enable comparison between topographies. Metrics were generated for each virtual landscape to quantify landscape configuration. An Ecosystem Services model (LUCI) was run to calculate a metric of “area mitigated” as a proxy for the provision of runoff mitigation Ecosystem Services. Simulated landscapes were established to answer two questions: firstly to identify the relative controls of patch area and fragmentation on service provision and secondly to identify catchment feature controls on these relationships. The work was done by Dario Masante and Amy Thomas, with input from Laurence Jones, as part of work under the NERC Biodiversity and Ecosystem Services (BESS) project NERC Grant Ref: NE/K015508/1. Full details about this dataset can be found at https://doi.org/10.5285/67f9fe33-14dd-4676-9a6d-65fdbafe2a46

This is the land parcels (polygon) dataset for the UKCEH Land Cover Map of 2019 (LCM2019) representing Northern Ireland. It describes Northern Ireland's land cover in 2019 using UKCEH Land Cover Classes, which are based on UK Biodiversity Action Plan broad habitats. This dataset was derived from the corresponding LCM2019 20m classified pixels dataset. All further LCM2019 datasets for Northern Ireland are derived from this land parcel product. A range of land parcel attributes are provided. These include the dominant UKCEH Land Cover Class given as an integer value and a range of per-parcel pixel statistics to help assess classification confidence and accuracy; for a full explanation please refer to the dataset documentation. LCM2019 represents a suite of geospatial land cover datasets (raster and polygon) describing the UK land surface in 2019. These were produced at the UK Centre for Ecology & Hydrology by classifying satellite images from 2019. LCM2019 was simultaneously released with LCM2017 and LCM2018. These are the latest in a series of UKCEH land cover maps, which began with the 1990 Land Cover Map of Great Britain (now usually referred to as LCM1990) followed by UK-wide land cover maps LCM2000, LCM2007 and LCM2015. This work was supported by the Natural Environment Research Council award number NE/R016429/1 as part of the UK-SCAPE programme delivering National Capability. Full details about this dataset can be found at https://doi.org/10.5285/6e67cba0-c872-4146-bc09-d6c98731f3b3

CEH Land Cover plus: Pesticides maps annual average pesticide applications across England, Wales and Scotland. The product provides application estimates for 162 different active ingredients including herbicides, insecticides, molluscicides and fungicides. It is produced at a 1km resolution with units of kg active ingredient applied per year, averaged between 2012 and 2017. Pesticide application rates (kg/km2/yr) are calculated for each of the crops grown in each 1km square, using information from CEH Land Cover® Plus: Crops 2015, 2016 and 2017 to determine where each crop is grown. Pesticide application data is provided by the Pesticide Usage Survey. Uncertainty maps are produced alongside each active ingredient map to quantify the level of confidence in the estimated applications. Uncertainty is quantified using the distribution of each parameter estimate obtained from the modelling method and is expressed relative to the total application. The product builds upon the Centre for Ecology & Hydrology (CEH) Land Cover® Plus: Crops product. These maps were created under the NERC funded ASSIST (Achieving Sustainable Agricultural Systems) project to enable exploration of the impacts of agrochemical usage on the environment, enabling farmers and policymakers to implement better, more sustainable agricultural practices. Full details about this dataset can be found at https://doi.org/10.5285/99a2d3a8-1c7d-421e-ac9f-87a2c37bda62